Gypsum Forks are forks having a tall shank that extends very high above the top hook. To this shank, a synthetic covering, usually replaceable, is added.
Replacement pads are available. The pads are impervious to grease and do not mark the sheet and are extremely durable. The 70 durometer pad is bonded to a steel plate for stability and rigidity. The slide-in feature of the pad makes replacement quick and simple, averting expensive down time.
Hook or shaft type mountings are available to suit your lift truck.
Bent and upset heel section.
The blade is polished and all sharp corners removed preventing damage to gypsum board.
There is a double-sided bevel at the tip for easy entry between gypsum sheets.
Fork widths are normally up to 12″ (300mm).
Square corner-in heel prevents damage to edge of gypsum sheet.
High back support is available.